SD-3

This is what the pros have been using a lot this year. It’s the best response we’ve ever had from a new model and is a required quiver addition for anyone passionate about riding new surfboards. Its more of a ripper version of the SD2, with the latest fine tuned rocker and bottom and outline, but with a Vee deck to a boxy, thinner rail. Its to be ridden the same thickness as a regular board, but thicker than an SD2. Guys who love the SD2 will want to ride this the same, but thicker by a 1/8" or so. Comes standard as Dbl wing swallow (Like Wardos) but can be ordered in any tail shape. SD-3
WHIPLASH
  WHIPLASH! The majority of our team has been using the whiplash for surfing in quality waves. Built for precision, tight radius, high speed, spontaneous surfing. The mind set behind this board was "anything not needed, take out". Low volume rails, vee deck, elliptical outline (No hip or bump in the tail) with narrower nose and tailblock combined with an aggressive rail rocker make this the most sensitive and responsive board we offer. Not recommended for below average surfers, but for the guy who wants to elevate his performance to the highest level. Performs best in curvy waves of any size. The Round tail is a favorite for the WQS and WCT surfers coming to us for boards.AVAILABLE IN XTR EPOXY CONSTRUCTION. WHIPLASH
THE SHARK
 

THE SHARK Designed specifically for average surfers in small surf (what we surf most) who don't want to ride a "fish". It excels in junk where most would normally ride a fish . Thus, the name "SHARK" A Low overall rockered, Flat deck with full steep rails, forgiving, wide nosed, fast paddling, built in drive, easy turning Carnivore that can catch anything in its path. Tends to excel in flat faced crumbly surf and mushy point breaks. Not recommended so much for hollow beach breaks. Ride 2-4" shorter than a typical short board and go have fun in waves you would usually leave for the groms.AVAILABLE IN XTR EPOXY CONSTRUCTION.

4 FIN SHARK .... AKA "The Quad Shark"... Features a wide tail (to hold all the fins) and a full curvy nose outline, a very shallow front foot concave to double concave Vee in the rear third of the board. Double wings and a deep, wide, vee filled swallow make for quick release direction changes without sliding. Great small wave board for average ability surfers, Yet guys like Ryan Carlson and Shane Beschen have been doing amazing things on these boards this year. Features the original SHARKS low entry rocker with flat deck and full steep rails for built in speed and stability. Works great in broken up surf and mushy walls. Paddles fast, makes you look good. . . (Ride 2-4" shorter than your normal board.)
RNF-Q
  RNF- (Round Nose Fish Quad) Taking our Flagship fish and updating it to hold 4 fins was a breeze. We simply cut 1" off the
tail (Increasing the width and making room for the fins) of the original RNF, re-foiled the rail and stringer rockers accordingly and viola' . The RNF-Q! Rather than a thruster (which rides and drives so much differently than a twin) Quads are a great opportunity to get the same free and loose feel of a twin but have added holding power and drive, allowing for harder
turns and a wider range of performance in more varied surf. Enjoy playing with a multitude of fin setups and positions for different feels in different conditions. A fun and functional update to the ...Lost Classic.		 RNF-Q
RNF-Q
RNF-Q
SD-4
  SD-4 (Creative Huh) This is what Matt has personally been working on and testing this summer. It’s a full on high performance quad that can convert to a thruster. Not groveler-specific like the shark, but an all-round board that can be ridden as a replacement to a performance shortboard model.. It’s basically an SD3 with a bit of length cut off the tail (to add width for holding the fins). It features a diamond tail that works by using the long stringer line as a sort of drive point in leu of the thruster fin. Offer as a convertible quad or thruster fin setup (meaning it comes with 5 fin boxes and can be ridden as both a thruster or a quad..). SD-4
PSYCHO WARD

PSYCHO WARD The CHRIS WARD PRO MODEL It was designed to handle Chris' power surfing in weak to average waves. With its fuller outline and relaxed entry rocker, it doesn't get over powered by hard turns in weak waves). It still has the Whiplash's low volume (but boxy) rails for sensitivity - but a wider nose, tail and overall dims- and less rocker for quick recovery from rail burying turns. Great for anyone who loves the performance of the Whiplash in good surf but wants something more for the junk. Great all around board for any level of surfer that pushes hard in turns.
AVAILABLE IN "XTR" EPOXY and PARABOLIC STRINGER D/D CONSTRUCTION.
ROUND NOSE FISH

ROUND NOSE FISH Before twin fin fish were cool (and probably after) there was the ...Lost RNF. Ridden to fame by Cory Lopez, Chris Ward and A.I. in the video 5'5" x 19 1/4" The most popular selling Fish model of all time. This years model features subtle updates to bottom curves and a redesigned nose template first used last year in developing the RNF-Q, that give the board a livelier feel. Less Vee and a longer central concave have given the RNF a quicker snappier ride in small surf, while the deep vee in the last 6" of tail maintain the carvability. (Ride 6 - 8" shorter than your normal board.) We have been making them wider in the last year capitalizing on surfers growing acceptance of wider and wider boards. The response has been great. "Forget the rest...Ours is still the best." AVAILABLE IN XTR EPOXY CONSTRUCTION
SD-2

SD-II (Our Best Selling Model of all time) "The Every mans shortboard" It features a low entry rocker into a hyper extended rail rocker in the tail, full forgiving outline and rails, with a deep single to double concave bottom featuring vee behind the rear fin (keeps the drive). The SD-II has evolved into an international favorite for the every day surfer and is one of the most popular surfboard models on the planet. Its a perfect blend of full and forgiving , yet high performance board for the every day surfer looking for slightly wider standard dims than the Pros potato chips with out sacrificing maneuverability.
AVAILABLE IN XTR EPOXY CONSTRUCTION.
MINI GUNS
  MINI GUNS Everyone should have one! Last year we put a great deal of focus on this area of board design. Designed as a primary travel board or for the best days at home (Unless you live in Hawaii.) This board paddles strong and holds in at high speeds yet still turns wherever and whenever you need it. Bottoms feature a fine single concave from just forward of the front foot through most of tail , with just a hint of vee behind the back fin. This combined with a bit more overall rocker and "shortboard" rails has makes our mini gun livelier and more performance based than a "Pure" gun. Thin rails in the back half keep it holding in the barrels and late drops. Combines speed and forgiveness and turning without too much lift in critical positions. A mini gun is 4-12" longer than your normal board and usually the same width and a bit thicker.

GUNS If you’re going to charge you want the confidence of proven designs and we can custom make boards for any size or situation. Our guns have never had more refinement that in the last couple years and we're more exited than ever in making guys the best board they ever had for those rare magic days. Over the last years we've included long time ...Lost international shaper Brian Bulkly in the designing of our guns for all conditions. Our team has never been more stoked. (A gun is 12" or more longer than your everyday shortboard).
 
  Check back soon. Descriptions are in the works!